AEP Networks ATAG VA4511AT, User Manual

Page: 36 / 67

- 36 -
10.2001 A. B. 599 51 21 26 EN
Easytronic plus
1. Press keys T2 and T3 simultaneously and ...
2. ...keep them pressed until the appliance is
switched on by the ON/OFF key T1. The key
LEDs T2 to T4 as well as possibly T5* will
flash to confirm that the service functions are
active.
3. The current set condition is indicated when
actuating key T4. The key LED T4 will flash
and the 7-segment display will indicate the
corresponding value (e.g.”d1”).
4./5. By actuating key T4 once again it is possible
to switch on resp. off the rinse-aid addition
depending on the previous condition.
d1 = rinse-aid addition on
d0 = rinse-aid addition off
6. The rinse-aid function is stored immediately
after any input. By switching off the appliance
with the ON/OFF key T1 or after a defined
time (approx. 60 sec), calculated from the
last actuation of key T4, one automatically
leaves the special cycle.
VGA - Easytronic plus
1. Press keys T2 and T3 simultaneously and ...
2. ...keep them pressed until the appliance is
switched on by the ON/OFF key T1. The key
LEDs T2 to T4 as well as possibly T5* will
flash to confirm that the service functions are
active.
3. The current set condition is indicated when
actuating key T4. The key LED T4 will flash.
A flashing “end” LED indicates that the rinse-
aid addition is active. The rinse-aid addition is
switched off, when this LED does not flash.
4./5. By actuating key T4 once again it is possible
to switch on resp. off the rinse-aid function
depending on the previous condition.
LED “end” is flashing = rinse-aid addition on
LED “end” is off = rinse-aid addition off
3. The rinse-aid function is stored immediately
after any input. By switching off the appliance
with the ON/OFF key T1 or after a defined
time (approx. 60 sec), calculated from the
last actuation of key T4, one automatically
leaves the special cycle.