INITIATE THE LISTEN-IN FUNCTION
Please put a " " in the box showing your selected option:
SECONDS
OPTION
SELECTED
6) At the end of the message, the dialer waits 3 seconds for you to acknowledge
Upon receipt of the acknowledgement signal, the dialer removes the
presently contacted telephone from its task list for the current event in the manner of listen-in
disabled.
7) If listen-in function is permitted
, the dialer enables the listen-in for a preset period
of time after acknowledgement.
8) At the end of the listen-in period, a short BEEP is generated. If you key in [1] again within
10 seconds, a new listen-in period begins. Without keying [1], the dialer will go
.
The listen-in period may be prolonged as many times as necessary or terminated the
function immediately after the short BEEP by keying in [9] from your telephone.
1 - - - - - - - - -
9 - - - - - - - - -
9) The listen-in function allows you to listen to the protected premises with your telephone. The
on-board microphone of the Alarm system is enabled during the listen-in period.
LISTEN-IN ENABLED
LISTEN-IN DISABLED
TO INITIATE A NEW LISTEN-IN PERIOD
TO TERMINATE THE LISTEN-IN FUNCTION IMMEDIATELY
(DEFAULT: 60 SECONDS)
(An DTMF
signal is required).
(enabled)
"1"
on hook
ALARM REPORTING AND ACKNOWLEDGEMENT
70
HA-266
FLASHING
FLASHING FAST
FLASHING FAST WITH STOPPING
INTERVAL
FLASHING SLOW
FLASHING TWICE
!
!
!
!
!
!
!
!
!
!
Zone is or was in alarm
Zone is in alarm memory, system
is disarmed
Zone is isolated
In exit delay period
Battery is under testing
Flashing Alternatively with "AC
POWER" LED during Power-up Delay
The system can not be armed
after exit delay expired due to
faulty zone(s) existing, see zone
indicator for the faulty zone(s)
Dialing in pulse format
The system is in telephone line
fault testing
!
AC power failure
Flashing Alternatively with "BATTERY"
LED during Power-up Delay
THE LED LIGHT INDICATORS
THE SYSTEM CONTROL CONSOLE AND ITS INDICATORS
.
INDICATORS
ZONES
(6 LEDs)
EXIT/ARMED
AC POWER
BATTERY
PROGRAM
ARM
PROHIBITED
DIALING
RECORDING
TAMPER
ZONE
(eq. to zone 8)
ON
Zone unsealed
Please check
the zone
connections
Alarm armed
AC Power is
being supplied
System in
program mode
System in arm
prohibited mode,
indicator is ON
during exit delay
period
Dialing in
DTMF format
Voice
recording is in
progress
!
!
!
!
!
!
!
!
(faulted)
Battery faulted
OFF
Zone sealed
Alarm disarmed
Battery normal
Normal state
System is
armed after exit
delay expired
System in forced
to arm mode
No dialing is in
progress
Dialing for duress
after the duress
code is entered
No recording, or
the recording
time is expired
!
!
!
!
!
!
!
!
!
(Normal)
7
HA-266
