THE SOUND INDICATORS
THE SYSTEM CONTROL CONSOLE AND ITS INDICATORS
8
HA-266
MEANING
!
!
!
!
!
!
Successful key entry, a pacifier tone
Successful code entry for the specific function
Unsuccessful code entry for the specific function
Wrong code number entered
Unauthorized command attempted
Code entry time expired, 10 seconds maximum per digit is allowed
SOUND
1 short beep
2 short beeps
5 short beeps
!
!
!
!
!
!
!
!
Exit delay expired, system is armed
Battery voltage low, AC power failure
Exit delay time
Entry delay time
The DAP jumper is ON
The telephone line is faulty after line fault testing
System can not be armed instantly due to
Duress code is entered but the communicator is not working
ARM PROHIBITED
1 long beep
1 short beep/30 seconds
Continuous beeping at
0.5 second interval
Continuous 5 short
beeps/5 seconds interval
2 beeps + 5 beeps
ALARM REPORTING AND ACKNOWLEDGEMENT
!
!
!
In alarm condition, except the local alarm, the system will also send alarm report to the
monitor station and the recorded message to the programmed telephones if the
communicator and the auto dialer are enabled.
The communicator has the priority to dial. After the communicator dialing is finished, the
system will start to dial the telephone numbers stored in the auto dialer.
If
is selected, the auto dialer will send the recorded message after the line
is through.
OPTION
SELECTED
OPTION
SELECTED
1) When you pick up the phone, you will hear the recorded alarm reporting message (
. At the end of the message, the dialer generates a BEEP tone and then waits 3
seconds for you to acknowledge.
2) The acknowledgement signal can be given by pressing the [1] button on your telephone
after the BEEP within 3 seconds.
1 - - - - - - - - -
3) Without an acknowledgement, the message will be repeated until the maximum number of
message is reached. The dialer will call the remaining numbers and will then retry the
numbers that did not acknowledge repeatedly until the maximum number of dialing attempts
are reached.
4) On
reporting mode, receiving an acknowledgement signal from a SINGLE
telephone in a group of 4
is sufficient to
consider the current event closed and call off the dialer session. The remaining 3 telephones
are there for backup purposes only.
5) On
reporting mode, an acknowledgement signal must be received from each
telephone in the group of 4
before the current event is considered
to be reported and closed.
VOICE MESSAGE
BACKUP
NON-BACKUP
RECEIVE AN ALARM REPORTING MESSAGE AND GIVING ACKNOWLEDGEMENT
Please put a " " in the box showing your selected option:
NON-BACKUP REPORTING
BACKUP REPORTING
(DEFAULT)
20
seconds)
(it
must be a tone dialing telephone)
(the dialer can store 4 telephone numbers maximum)
(if 4 numbers are stored)
ON YOUR TELEPHONE KEYBOARD
69
HA-266
