THE AUDIBLE NOTIFICATIONS
14
SUMMARY OF THE VISUAL AND AUDIBLE NOTIFICATIONS
NOTIFICATIONS
Exit And Entry Beeps
NOTE:
Warning beeps
!
!
!
!
!
!
!
Short beeps at 0.5 second interval
Increase to 4 beeps/second at the last 10
seconds, then
One long beep to indicate the end of the
delay period
Short beeps at 0.5 second interval
Increase to 4 beeps/second at the last 10
seconds, then
One long beep to indicate the end of the
period
The beep stops at anytime when manual battery
test starts or when system is set to programming
mode with the system code (HA-263D)
4 fast beeps at 1 second interval
2 Short beeps
1 Short beep/30 seconds
5 Short beeps first, then
1 Short beep/30 seconds
EVENTS
System in Exit Delay Period
OR
System in Entry Delay Period
System in Standby Mode Period
System is or was in Alarm condition
(Alarm occurred)
Successful Key-switch operation
OR
Battery is Normal after Testing
AC power Failure
Battery Low After Testing
HA-263
15
OPEN THE CABINET FOR SERVICE
GENERAL SPECIFICATIONS
The HA-263K is protected by a built-in tamper switch. Opening of the cabinet will trigger the
tamper switch to give alarm.
If opening of the cabinet for service is required, it is necessary to set the system to standby
mode by holding the keyswitch in contact for 5 seconds (ignore the 2 arming beeps). The
standby mode lasts for 1 minute and the system gives no function including the tamper switch
during the period. Setting the system to standby mode can only be done while all the partitions
are in disarmed mode without alarm memory existing.
!
!
!
!
!
!
!
!
!
!
!
!
!
Power Source
: 16.5V AC
Back-up Battery Requirement
: 6.5-7.0Ah, 12V Rechargeable sealed lead acid - not
included
(Built-in Charger in system)
Temperature Range
: 0 Deg C to +65 Deg C
Standby Current
: 100mA Typical
Protection Zones
: 8 Protection zones in 3+3+2 partitions
Control Station
: Key-switches and/or Digital keypads, 4 maximum
Entry Delay
: 15-90 Seconds
Exit Delay
: 60 Seconds
Alarm Duration
: 3-15 Minutes, or
Power Up Delay (Standby Mode): 60 Seconds
Audible Beeps
: Entry, Exit & Alarm Warning, ON-OFF programmable
G. Weight
: 2.5 Kgs (one Master unit & one Control Station)
Dimensions
: Master unit: 265(W) X 270(H) X 78(D) mm
Key-switch: 73(W) X 117(H) X 43(D) mm
Digital Keypad: 117(W) X 117(H) X 27(D) mm
4
HA-263
