• Then the LCD display alternates five times between the values for the body fat and the
body water percentage before switching off automatically.
Display and Error Messages
General
If an error message (Err) appears in the display please wait until the scales switch off. Then
switch them o again to continue using them. For a complete reset remove the battery for a
moment and then reconnect it.
Messages
• Switching on: All segments light up simultaneously. This is a check that the displays are
working correctly.
• „- - - - - -„: The scales are not positioned correctly or the weight to be measured is too
low. Correct operation is not possible. Place the scales on a flat and solid
surface.
• „Err„:
The calculated body fat/water percentage ranges beyond the upper or lower
measuring limit. The measurement was aborted before the measuring
process was completed or it was not possible to perform measuring.
• „EEEE„:
The indication ‘EEEE’ means that the weight exceeds 180 kg. Do not exceed
the device’s maximum load to prevent damages to the device and the sensors.
- Place the scales on a flat and solid surface.
• „LO„:
The battery charge is too low.
Usage and care tips
• Weigh yourself without any clothes or shoes on before meals and always at the same
hour of the day. The best time to weigh yourself is when you wake up in the morning.
• The balance rounds off weight to the closest 100 g.
• If you weigh yourself twice and two different values are given, it means that your weight
is comprised between both values.
• Do not immerse the balance in water: the electronic components can be damaged.
• Remove the batteries if the scales will not be used for a longer period of time.
• Handle the balance with care, as it is a precise measuring instrument. Do not drop it or
jump on it.
• Absolutely no need for maintenance.
• Do not load the appliance with more than 180 kg (398,8 lb) to avoid damaging the
device.
Cleaning
• Clean the device with a slightly moist cloth. Make sure that no humidity or waters seeps
into the device!
• Do not use abrasive detergents! These can damage the casing of the device!
• Use a commercially sold detergent or soap for cleaning.
GB
64
PW_4908_Bed_Anl4.qxd 30.05.2006 9:33 Uhr Seite 64
