AEG Elegant User Manual Download Page 64

Page: 64 / 72

Cannot dial out or receive calls

Check that the mains power is correctly connected.

The batteries may need recharging.

Has there been a power cut? If so, place the handset back on the base for

10 seconds and try again. If it still does not work disconnect the batteries
and mains power for 10 minutes, then reconnect and try again.

You have a dial tone, but the phone will not dial out

You may need to change the dial mode from tone to pulse, see page 29.

If you are connected to a switchboard, check whether you need to dial an

access code.

Handset does not ring

The ringer volume may be switched off, see page 26.

Check that the mains power is correctly connected.

Make sure the handset is registered to the base, see page 58.

No display

The batteries may be flat, dead or incorrectly inserted. Recharge or replace

the batteries.

icon flashes

Is the handset registered correctly to the base, see page 58.

Check that the mains power is correctly connected.

Check that the handset is within range of the base.

The batteries are low, place the handset on the base/charger to recharge.

icon not scrolling

Try cleaning the charging contacts.

Check that the mains power is correctly connected.

You hear the busy tone when you press Talk/Handsfree.

Make sure the handset is in range of the base.

Another handset registered to your Elegant base may be on the line.

Summary of Contents for Elegant









































































Search results

Summary of Contents for Elegant

Reviews:

Related manuals for Elegant

Brands by name

Popular brands

AEG Elegant, User Manual

Search results

Summary of Contents for Elegant

Reviews:

Related manuals for Elegant

Brands by name

Popular brands