7
Setting up
4.
Connect the base
-
Plug the mains power cable into the socket marked
1.
on the underside
of the base and plug the other end into the mains power wall socket and
switch the power on.
The telephone cable is pre-installed in the base but do not connect the
other end to the telephone wall socket yet.
Rechargeable batteries are already fitted in your handset. To activate
2.
the batteries, pull the plastic tab away from the bottom of the handset as
shown on the label provided.
Place the handset on the base to charge for at least 24 hours. The red
3.
charging light comes on. When the handset is fully charged the display
shows the
icon.
After 24 hours, plug the telephone line cord from the base into the
4.
telephone wall socket.
Setting up for multiple packs
-
If you have purchased a multiple pack, this process will need to be carried out
for all handsets and chargers:
Plug the mains power cable into the socket marked
1.
on the underside of
the charger.
Activate the batteries as described previously above.
2.
Place the handset on the charger to charge for at least 24 hours. When the
3.
handset is fully charged the
icon will indicate that it is fully charged.
Your Elegant is ready for use.
Battery low warning
5.
If the
icon flashes in the external display you will need to recharge the
handset before you can use it again.
During charging, the
icon will scroll in the display.
