Themen
75
6.
Press Cursor button
(Fig. 3/10) in order to move the station to
the left-hand list.
Proceed in the same way with the other stations.
Exiting the Menu:
Press the
SETUP
button (Fig. 3/13).
Here you can enter the date and time.
To do so, please proceed as follows:
1.
Use
the
Cursor buttons
to select the menu item “Date” or “Time”.
2.
Press the
SELECT
button (Fig. 3/11). The fi rst fi gure of the number
to be entered is marked.
3.
With
Cursor buttons
/
(Fig. 3/12, 32) you can now enter fi gu-
res between 0 and 9.
4.
With
Cursor buttons
/
(Fig. 3/10, 33) you can now enter the
month, day and year as well as the hours, minutes or seconds.
Confi rm your entry with the
SELECT
button (Fig. 3/11) or press the
EDIT
button (Fig. 3/14) to cancel the procedure.
Recordings
NOTE:
If you would like to make a recording using the internal TV recei-
ver of the DVD recorder, fi rst you have to connect an appropriate
antenna and then store the television stations. Please see the
section „Scan Channels“.
If you do not want to make a recording using the internal TV re-
ceiver of the DVD recorder you have to establish a corresponding
line connection with an output device. Please see the operating
instructions of the corresponding device.
1.
Insert a recordable DVD±RW or DVD±R into the recorder.
2.
Use
the
TV
(Fig. 3/4) or
AV
buttons (Fig. 3/26) to select an input
source.
Selection in the case of
AV
:
CVBS
CVBS
rear
S-VIDEO
rear
DV
Scart
Selection in the case of
TV
:
You can record from any station that has been stored.
3.
Press the
STOP
button (Fig. 3/22) to cancel the recording.
NOTE:
With a new disk it takes about 10 seconds for the recording pro-
cess to fi nally stop. This is normal. During this time the CD/DVD
drawer cannot be opened.
The formatting of a DVD±RW may take up to approximately
30 minutes.
Changing the default settings
System Setup -
Clock
Simple recording
05-DVD-R 4518 AEG - GB 75
05.07.2006, 10:31:34 Uhr