English
9
5. BEFORE FIRST USE
5.1 Attaching Telescopic runners
1. Obtain left hand side rack and left hand
slide – see image to identify.
2.
1
L = left hand side
R = right hand side
2
CLICK!
3
The shaded wires indicate the wire the
slide can be mounted on. Fit slide rear
clips to the rear of wire at an angle as
shown below.
3.
1
L = left hand side
R = right hand side
2
CLICK!
3
Push slide front clip over wire until
secured
1
L = left hand side
R = right hand side
2
CLICK!
3
5.2 Pyro proof side racks
Insert the rear peg into the rear access hole
provided, ensuring peg is fully inserted.
Then locate the front hole and insert screw.
Tighten with Allen key.
5.3 Fitting the shelves and grill dish
carrier between the side rack wires
The shelves are designed so that they
have maximum extension but cannot be
accidentally pulled right out. The grill dish
carrier is designed the same way and can
slot straight into the side racks. To fit a shelf
or grill dish carrier to side racks:
1. Locate the rear edge of the shelf/carrier
in between guide rails of the side rack -
see diagram.
2. Ensure the same rail positions on both
sides of the oven are being engaged.
With the front edge raised, begin to slide
the shelf into the oven.
3. Once the detents have passed the front
edge of the side rack, the shelf can
be pushed completely in. When fully
inserted the shelf/carrier should not
interfere with the closed oven door.