www.aegaustralia.com.au | www.aegnewzealand.co.nz
40
side tabs have clipped into the column.
Pull the hinge locking tabs back up and
close the door.
WARNING!
Make sure that the glasses are inserted in
the correct position otherwise the surface
of the door may overheat.
12.5 Changing the light globes
• Switch the appliance off at the isolation
switch before attempting to change the
light globe.
• There are 2 light globes located in the top
of the oven cavity towards the rear.
• To get access to the globes, firstly drop
the element down as explained under
‘Releasing the grill element’ topic.
• To remove, turn oven light glass anti-
clockwise.
• A special high temperature resistant
borosilicate globe should be used.
This can be purchased from the Customer
Care Centre.
Locking tab up - normal position
Locking tab down - for cleaning
Inner Glass
Middle Glass x 2
Outside
_
Light glass can be removed
- turn anti-clockwise
12.6 Releasing the grill element
To release the grill element so that the oven
roof can be accessed for cleaning.
• Push element upwards and rotate the
3 clips backwards and away from the
element rod. This will allow the front of the
element to drop down.
