AEG BP5023001, User Manual

Page: 16 / 40

Function Lock
Applicable to models with Pyro Cleaning function.
The Function Lock prevents an accidental change of the oven function. You can activate the
Function Lock function only when the appliance operates.
Activating and deactivating the Function Lock function:
1. Activate the appliance.
2. Activate an oven function or setting.
3. Press and hold and at the same time for 2 seconds.
4. An acoustic signal sounds. Loc comes on/goes out in the display (when you activate or
deactivate the Function Lock).
If the oven has Pyro Cleaning function, the door is locked.
You can deactivate the appliance when the Function Lock is on. When you deactivate the
appliance, the Function Lock deactivates.
Loc comes on in the display when you turn a knob or press a button.
Residual heat indicator
Display shows the residual heat indicator after end of every cooking sessions when the
temperature inside oven cavity is more then 100 °F. Use Temperature knob to show the
oven temperature on the display.
Cooling fan
When the appliance operates, the cooling fan activates automatically to keep the surfaces
of the appliance cool. If you deactivate the appliance, the cooling fan can continue to oper-
ate until the appliance cools down.
Automatic switch-off
For safety reasons the appliance deactivates itself after some time:
• if an oven function is running.
• if you do not change the oven temperature.
Oven temperature Switch-off time
80 °F - 245 °F 12.5 h
250 °F - 395 °F 8.5 h
400 °F - 480 °F 5.5 h
485 °F - maximum °F 3.0 h
After an automatic switch - off, press a any button to operate the appliance again.
The Automatic switch - off works with all oven functions, except Light, Core Temperature
Sensor, Duration and End.
16 Additional functions