--------------------------------------------------------------------------------19/50--------------------------------------------------------------------------------
5.2
Instructions for the hardware settings
5.2.1
BD – baudrate
The command BD enables the change of the baud rate. The settings are directly effective.
Input format:
BD
<SP>
parameter
<CR>
Output (example):
2
<CR>
Parameter:
PARAMETER
FUNCTION
0
4800 baud
1
9600 baud
2
19200 baud
3
38400 baud
4
57600 baud
5
115200 baud
5.2.2
RE – read EEPROM
You can read out the internal EEPROM with the RE command.
Input format:
RE
<SP>
parameter
<CR>
Output (example):
FF
<CR>
Parameter:
PARAMETER
FUNCTION
0000h..079Fh
address
5.2.3
RF – radio frequency
With the command RF you can switch the antenna field on and off.
Input format:
RF
<SP>
parameter
<CR>