AEE
Quad-rotor Aircraft System
Professional
·
Leading
- 6 -
select LiPo BALANCE, and the screen displays:
.
3) Press
again for confirmation, and the current values begins to pulsate:
; press
at this moment to decrease or increase the current value; press
for confirmation after the
current is adjusted to the proper value.
4) After confirmation of the current value, the voltage value begins to pulsate:
;
press
to select the corresponding voltage of the battery; press
for confirmation after the
voltage is adjusted to the proper value.
5) After setting all parameters, long press
for 2s, and the charger begins to detect the battery; after
successful detection, press
to start charging, or press
to cancel charging.
6) After charging is completed, the charger sends out beep sounds, and the screen displays the following
information:
To avoid short circuit resulted from misoperation, DO NOT pull out the charger wires during charging.
4 Complete Charging
Battery voltage after
charging is completed (V)
Charge
current (A)
Charging
completed
Charging
mode
Charging
time (M)
Charged capacity
(mAh)
