AEE
Quad-rotor Aircraft System
Professional
·
Leading
- 2 -
loss of control.
* For editing of waypoints, please make sure each waypoint is high enough in altitude (relative to the take-off
position of the aircraft) to avoid intersection between the air route and mountains or buildings, which may result in
collision and damage.
* If the map fails to be loaded when the ground station software is started, please close the software, connect to the
network and restart the software; or make use of data management of Google Maps to restore map data.
* Under the precondition that network service is available at the ground station, if Google Earth fails to download
new map data, the user can first enter Google Satellite. After it is confirmed that Google Satellite can download
new maps, enter Google Earth again to download new maps. If this problem still exists, please contact our
Customer Service Department.
* When the remote control is used to control the aircraft, please make sure that the option of “Send joystick data” in
the ground station software is NOT checked before take-off; when the ground station joystick is used to control the
aircraft, please make sure that the remote control is in the OFF state before take-off.
* In order to avoid accidental damage of map files, please timely back up the map data after downloading.
* Please disable the function of auto clearing Internet Explorer in different types of antivirus software to prevent the
map data from being deleted by mistake.
* For outdoor use, it is suggested to carry a 3G network card in case of absence of map in the existing map data or
backup data.
* For the sake of safety of your life and property, please use the product strictly in accordance with this User’s
Manual, and do not carry out improper operations.
Notice: Please strictly comply with the above safety precautions; any consequence resulted from
incompliance shall be on your own account.
Charging
This product is equipped with a professional intelligent balance charger with built-in high-performance
microprocessor and professional control software. This charger can realize simultaneous charging of four different
sets of batteries.
Use a Battery Indicator to Detect the Battery Level
Prior to take-off, please first check the battery level of each device; in case of low battery level, charging is required.
Use a battery indicator to detect the battery level. When the battery voltage of the aircraft is below 14.8V, please
charge the battery (the flight time will be shortened when the voltage is lower than 16.8V); when the battery voltage
of the remote control is below 11.1V, please charge the battery.
Connect the battery indicator to the battery in the direction shown below.
