AEE
Quad-rotor Aircraft System
Professional
·
Leading
- 5 -
Step
Illustration
Description
Step 1:
Connect the two charger wires
according to the figure, and pay
attention to the polarity of terminals.
Step 2:
Select
the
charging
interface
corresponding to the number of the
cells (2S, 3S, 4S, 5S and 6S); connect
the power plug after connecting the
charging interface.
Step 3:
Complete connection.
Step 4:
Connect the charger to AC 220V
power supply with the supplied power
cord; 4 LED indicators of the charger
will be on and then you can set the
parameters of the charger.
3 Set Parameters and Start Charging
After the battery is connected to the charger, set the parameters for the charger as follows:
Battery
Battery
capacity
Range of current
regulation
Recommended
charging
current
Voltage
Number of
cells
Battery of remote control
5000mAh
0-3A
2.0A
11.1V
3S
Battery of aircraft
4000mAh
0-6A
3.0A
14.8V
4S
Battery of aircraft
6000mAh
0-6A
3.5A
14.8V
4S
Battery of aircraft
8000mAh
0-6A
4.0A
14.8V
4S
Set the charger according to the above table; the detailed operation method is as follows:
1) Press
to select a battery type, and call out LiPo BATT; the screen displays:
.
2) Press
for confirmation, and the screen displays:
; then press
to
