AEE
Quad-rotor Aircraft System
Professional
·
Leading
- 40 -
Step 2: Select the desired flight mission, click “Open” and the ground station software will automatically load the
information of the selected flight mission.
After successful loading of the mission, you shall perform steps in 5, 6 and 7 in the ground station control
software before the aircraft can execute the loaded flight mission.
8 Start the Aircraft
1) After successful connection of the ground station to joystick serial port COM2, check the option of “Send joystick
data”.
2) Switch to the manual fly mode.
3) For the startup method, please see the description in the section of “Start the Aircraft with the Remote Control”.
1) During outdoor flight, please make sure that the GPS signal strength indicator is no less than 6.
2) Check if the indications of the heading indicator and the attitude indicator are consistent with the current
status of the aircraft; in case of any inconsistence, please contact us immediately.
9 Display Track / Clear Track
1) After starting the aircraft, click “Display Track” to display the real-time flight track of the aircraft during its flying
along the air route (Fig. 1); if “Display Track” is not clicked, the real-time flight track of the aircraft will not be
displayed (Fig. 2).
2) When “Clear Track” is clicked after track is displayed, the current real-time flight track of the aircraft will be
cleared (Fig. 2).
(Fig. 1)
(Fig. 2)