50
APR Protection
This function protects a camera from ARP attacks. The gateway and the MAC address must be set properly
before a PC can access the camera from another network; if an incorrect MAC is set, only PCs on the same
LAN can access.
1.
Click
Setup
>
Security
>
Network Security
>
ARP Protection
.
2.
Select the check box to enable the ARP binding function and set the gateway MAC address.
3.
Click
Save
.
IP Address Filtering
Use IP address filtering to allow or forbid access from specified IP address(es).
NOTE!
This function is not supported by some models. Please see the actual model for details.
1.
Click
Setup
>
Security
>
Network Security
>
IP Address Filtering
.
2.
Select
On
to enable IP address filtering.
3.
Select a filtering mode, and then add IP address(es).
4.
Click
Save
.
NOTE!
⚫
If
Filtering Mode
is set to
PTZ
, then only the added IP address(es) are allowed to access the camera. If
Filtering
Mode
is set to
Deny Access
, then only the added IP address(es) are not allowed to access the camera.
⚫
Up to 32 IP addresses are allowed. Each IP address can be added once only.
⚫
The first byte of each IP address must be 1-223, and the fourth cannot be 0. For example, the following IP
addresses are illegal and cannot be added: 0.0.0.0, 127.0.0.1, 255.255.255.255, 224.0.0.1.
Access Policy
1.
Click
Setup
>
Security
>
Network Security
>
Access Policy.
