19
2.
Click
, and then drag the mouse to cover the intended part of the images. To delete, select the area
and then click
.
Media Stream
Media Stream
You can display the established media streams from a camera. You may also set the camera so it transmits
code streams by the UDP or TCP protocol to a specified IP address and port number. The settings can be
saved and take effect after the camera is restarted.
NOTE!
⚫
This function is not supported by some models. Please see the actual model for details.
⚫
Choosing a transport protocol based on your actual needs and network performance. Generally speaking,
TCP enables better image quality than UDP but also causes higher latency.
1.
Click
Setup
>
Video & Audio
>
Media Stream
.
2.
Click
, select a stream type, and then set the IP address and port number of the unicast or multicast
group for the decoding device that receives audio and video streams from the camera.
If you want the device to establish the media stream that has been configured before automatically
after the restart, select
Yes
for
Persistent
.
