15
Item
Description
WebSocket
Select to enable or disable WebSocket.
Destination IP
Enter the IP address of the third-party platform.
Destination
Port
Enter the listener port of the third-party platform.
Device ID
The
default device ID is the device’s serial number. You can set a device ID as needed.
Authentication
Key
Enter the authentication key used to connect the camera to a third-party platform. Make
sure the authentication key configured on the camera and the third-party platform is the
same.
Confirm
Authentication
Key
Confirm the authentication key you entered by entering it again.
Online Status
Check whether the device is successfully connected to the third-party platform.
Click
Save
.
Video & Audio
Video
You can set video parameters that your camera supports and view the current status of BNC output. If
available, you may also enable sub-stream and third stream as required.
NOTE!
⚫
This function may vary with models. Only some camera models support the third stream. To determine if
your camera supports this function, see the Web interface.
⚫
After enabling the sub or third stream, modify the parameters as required. The parameters for the sub and
third stream have the same meanings as that for the main stream.
1.
Click
Setup
>
Video & Audio
>
Video
.
