Advantech PCI-1241, User Manual

Page: 59 / 104

49 Chapter 4
4.4 Initializing the Card
When the ‘Initialize’ button is pressed, the utility will process the initial-
ization commands to the PCI-1241/42. If the card is correctly plugged,
the message “Card is active” will show on the top of utility, and the
‘Close card’ button will be enabled.
Figure 4.9: The Card Is Now Active
4.5 Servo On
This step is only if you need to work with servo motors. The servo motor
can be activated when the “Servo On” button is pressed.