Advantech EKI-9628G, User Manual

Page: 91 / 148

78 EKI-9628G User Manual
4.9.1.1 QoS Properties
The QoS Properties allows you to set the QoS mode.
To access this page, click QoS > General > QoS Properties .
Figure 4.74 QoS > General > QoS Properties
The following table describes the items in the previous figure.
The ensuing table for QoS Global Information settings are informational only and
display the following: QoS Mode.
4.9.1.2 QoS Settings
Once the QoS function is enabled, you can configure the available settings.
To access this page, click QoS > General > QoS Settings .
Figure 4.75 QoS > General > QoS Settings
The following table describes the items in the previous figure.
The ensuing table for QoS Status settings are informational only and display the fol-
lowing: Port, CoS value, Remark CoS, Remark DSCP and Remark IP Precedence.
Item Description
QoS Mode Select Disabled or Basic to setup the QoS function.
Apply Click Apply to save the values and update the screen.
Item Description
Port Enter the port number to associate with the QoS setting.
CoS Value Click the drop-down menu to designate the Class of Service (CoS)
value (0 to 7) for the Port entry.
Remark CoS Click Disabled or Enabled to setup the Remark CoS function. When
enabled the LAN (preassigned priority values) is marked at Layer 2
boundary to CoS values.
Remark DSCP Click Disabled or Enabled to setup the DSCP remark option for the
QoS function.
Remark IP Prece-
dence Click Disabled or Enabled to setup the Remark IP Precedence for
the QoS function.
Apply Click Apply to save the values and update the screen.