Advantech EKI-9628G, User Manual

Page: 52 / 148

EKI-9628G User Manual 39
The ensuing table for Port Status settings are informational only and display the fol-
lowing: Port, Edit (click to enter description), Enable State, Link Status, Speed,
Duplex, FlowCtrl Config, and FlowCtrl Status.
4.5.2 Port Mirror
Port mirroring function allows the sending of a copy of network packets seen on one
switch port to a network monitoring connection on another switch port. Port mirroring
can be used to analyze and debug data or diagnose errors on a network or to mirror
either inbound or outbound traffic (or both).
There are no preset values in the Port Mirror. The displayed values do not represent
the actual setting values.
To access this page, click L2 Switching > Port Mirror .
Figure 4.16 L2 Switching > Port Mirror
The following table describes the items in the previous figure.
Speed Click the drop-down menu to select the fiber port speed: Auto, Auto-
10M, Auto-100M, Auto-1000M, Auto-10/100M, 10M, 100M, or 1000M.
Fiber Duplex Click the drop-down menu to select the fiber duplex setting: Half or
Full.
Flow Control Click the radio button to enable or disable the flow control for the fiber
port function.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
Session ID Click the drop-down menu to select a port mirroring session from the
list. The number of sessions allowed is platform specific.
Monitor session state Click the drop-down menu to enable or disable the session mode for a
selected session ID.
Destination Port Click the drop-down menu to select the destination port and receive
all the traffic from configured mirrored port(s).
Allow-ingress Click the drop-down menu to enable or disable the Allow-ingress func-
tion.
Sniffer RX Ports Enter the variable to define the RX port.
Sniffer TX Ports Enter the variable to define the TX port.
Apply Click Apply to save the values and update the screen.