Advantech EKI-9628G, User Manual

Page: 102 / 148

EKI-9628G User Manual 89
4.10.1.5 LLDP Overloading
To access this page, click Management > LLDP > LLDP Overloading .
The ensuing table for LLDP Overloading settings are informational only and display
the following: Port, Total (Bytes), Left to Send (Bytes), Status and Status (Mandatory
TLVs, 802.3 TLVs, Optional TLVs and 802.1 TLVs).
4.10.2 SNMP
Simple Network Management Protocol (SNMP) is a protocol to facilitate the monitor-
ing and exchange of management information between network devices. Through
SNMP, the health of the network or status of a particular device can be determined.
4.10.2.1 SNMP Settings
The SNMP Settings page allows you to set the SNMP daemon state (enabled or dis-
abled).
To access this page, click Management > SNMP > SNMP Settings .
Figure 4.90 Management > SNMP > SNMP Settings
The following table describes the items in the previous figure.
The ensuing table for SNMP Information settings are informational only and display
the following: SNMP.
4.10.2.2 SNMP Community
The SNMP Community page provides configuration options for the community.
SNMP v1 and SNMP v2c use the group name (Community Name) certification. It’s
role is similar to the password function. If SNMP v1 and SNMP v2c are used, you can
go directly from the configuration settings to this page to configure the SNMP com-
munity.
To access this page, click Management > SNMP > SNMP Community .
Figure 4.91 Management > SNMP > SNMP Community
The following table describes the items in the previous figure.
Item Description
State Click Enabled or Disabled to define the SNMP daemon.
Apply Click Apply to save the values and update the screen.
Item Description
Community Name Enter a community name (up to 20 characters).