Advantech EKI-9628G, User Manual

Page: 70 / 148

EKI-9628G User Manual 57
4.5.10.3 STP Bridge Settings
The STP Bridge Settings page allows you to configure the priority, forward delay,
maximum age, Tx hold count, and the hello time for the bridge.
To access this page, click L2 Switching > Spanning Tree > STP Bridge Settings .
Figure 4.41 L2 Switching > Spanning Tree > STP Bridge Settings
The following table describes the items in the previous figure.
The ensuing table for STP Bridge Information settings are informational only and
display the following: Priority, Forward Delay, Max Age, Tx Hold Count and Hello
Time.
The ensuing table for STP Bridge Status settings are informational only and display
the following: Bridge Identifier, Designated Root Bridge, Root Path Cost, Designated
Bridge, Root Port and Last Topology Change.
4.5.10.4 STP Port Advanced Settings
The STP Port Advanced Settings page allows you to select the port list to apply this
setting.
To access this page, click L2 Switching > Spanning Tree > STP Port Advanced
Settings .
Figure 4.42 L2 Switching > Spanning Tree > STP Port Advanced Settings
Item Description
Priority Click the drop-down menu to select the STP bridge priority.
Forward Delay Enter the variable (4 to 30) to set the forward delay for STP bridge set-
tings.
Max Age Enter the variable (6 to 40) to set the Max age for STP bridge settings.
Tx Hold Count Enter the variable (1 to 10) to designate the TX hold count for STP
bridge settings.
Hello Time Enter the variable (1 to 10) to designate the Hello Time for STP bridge
settings.
Apply Click Apply to save the values and update the screen.