Advantech EKI-9628G, User Manual

Page: 60 / 148

EKI-9628G User Manual 47
The following table describes the items in the previous figure.
The ensuing table for QinQ Global Information settings are informational only and
display the following: Outer VLAN Ethertype.
4.5.5.2 Port Settings
The Port Settings page allows you to define the outer PVID and outer mode for a
selected port.
To access this page, click L2 Switching > Q-in-Q > Port Settings .
Figure 4.27 L2 Switching > Q-in-Q > Port Settings
The following table describes the items in the previous figure.
The ensuing table for QinQ Port Information settings are informational only and dis-
play the following: Port, Outer PVID and Outer Mode.
Item Description
Outer VLAN
Ethertype Enter the outer VLAN handled by the switch giving the attached
machine a single-tagged 802.1Q VLAN frame.
Apply Click Apply to save the values and update the screen.
Item Description
Port Select Enter the switch port (part of VLAN configuration) to configure the
selection as a tunnel port.
Outer PVID Enter the Port VLAN ID (PVID) to assigned the native VLAN ID. All
untagged traffic coming in or out of the 802.1Q port is forwarded
based on the PVID value
Outer Mode Click the drop-down menu to select between UNI or NNI role.

UNI: Selects a user-network interface which specifies communi-
cation between the specified user and a specified network.

NNI: Selects a network-to-network interface which specifies
communication between two specified networks.
Apply Click Apply to save the values and update the screen.