![background image](http://html1.mh-extra.com/html/advantech/arma-c250-crm/arma-c250-crm_installation-and-operating-manual_2858252027.webp)
ARMA-C250-CRM
26
4.2.1
F
RONT
P
ANEL
M
ENU
S
YSTEM
MAIN MENU
SUB-MENUS
Display product identification
Display configuration
Utilities, press
[Enter]
to access sub-menu
Perform LED and display test
Reflected power display (dBm)
Output power display (dBm)
Power amplifier hot spot temperature display (°C)
Power amplifier shroud temperature display (°C)
Power supply current display (A)
Display input & output monitor
coupling loss across frequency range
Monitor calibration, press
[Enter]
to access
sub-menu
Set output power low level threshold
Switch between LOCAL and REMOTE control mode
Select POWER ON or MUTE
(not available in REMOTE control mode)
Adjust attenuation level
(not available in REMOTE control mode)
CAUTION:
In a redundant system, if the ON-LINE unit is set in MUTE by a command
issued by the operator, the system will automatically switch the other unit as ON-LINE and
the muted unit as STANDBY.
CAUTION:
In a redundant system, the switching from MANUAL mode to AUTO mode
should be performed from the ON-LINE unit.
Summary of Contents for ARMA-C250-CRM
