Advantech 3718HG, User Manual

Page: 15 / 68

Chapter 2 Installation 11
addresses range from Hex 000 to Hex 3F0. Other devices in your
system can use some of these addresses.
We set the PCM-3718H/3718HG for a base address of Hex 300 at the
factory. If you need to adjust it to other address ranges, set SW1 by
referring to the following table:
Module I/O addresses (SW1)
Range (hex) Switch position
1 2 3 4 5 6
000 - 00F
l l l l l l
010 - 01F
l l l l l ¡
:
200 - 20F
¡ l l l l l
210 - 21F
¡ l l l l ¡
:
*300 - 30F
¡ ¡ l l l l
:
3F0 - 3FF
¡ ¡ ¡ ¡ ¡ ¡
¡
= Off
l
= On * = default
Note: Switches 1-6 of the SW1 control the PC bus address
lines as follows:
Switch 1 2 3 4 5 6
Line A9 A8 A7 A6 A5 A4