![background image](http://html1.mh-extra.com/html/advantech/3718hg/3718hg_user-manual_2856597014.webp)
1 0
PCM-3718H/3718HG User's Manual
2.1 Initial Inspection
We carefully inspected the PCM-3718H/3718HG mechanically and
electrically before we shipped it. It should be free of marks and
scratches and in perfect order on receipt.
As you unpack the PCM-3718H/3718HG, check it for signs of
shipping damages (damaged box, scratches, dents, etc.). If it is
damaged or fails to meet specifications, notify our service department
or your local sales representative immediately. We will then make
arrangement to repair or to replace the unit for you.
Discharge any static electricity on your body before touching the
board by touching the back of the system unit (grounded metal).
Also keep from materials of static electricity such as plastic, vinyl and
styrofoam.
Remove the PCM-3718H/3718HG from its protective packaging by
grasping the rear metal panel. Handle the module only by its edges to
avoid static electricity which could damage its integrated circuits.
Keep the anti-static packaging material for storage and protection
when you have to remove the module from its connector.
2.2 Switch and Jumper Settings
Ease-of-use is the primary design goal when we designed the PCM-
3718H/3718HG. This module has one function switch and seven
jumper settings.
The following sections tell you how to configure the module. You
may want to refer to the figure on page 5 for details of module
components.
Base address selection (SW1)
You control the PCM-3718H/3718HG’s operation by reading or
writing data to the PC’s I/O (input/output) port addresses. The PCM-
3718H/3718HG requires 16 consecutive address locations. The
switch SW1 sets the module’s base (beginning) address. Valid base
Summary of Contents for 3718HG
