ADVANCED UV LIGHT ELIXIR, Owner'S Manual

Page: 35 / 54

Original Dr. Müller ®
ORIGINAL DR. MÜLLER HIGH PERFORMANCE TANNING EQUIPMENT
35
Aroma Device
The container with the aroma device must be replaced when
empty or if you want to provide a new aroma.

Use only aroma solutions as provided by
Advanced UV Light. Using any other aroma may
result in malfunctions and voids all claims of
warranty.
Disassembly

Disassemble the front cover plate as described on page
31.
 Pull the A/C trough slightly forward.
Assembly
 Unscrew the vaporizer lid (2) from the container (5) of the
aroma device.

Unscrew the closing lid (4) from the container.
 Screw the vaporizer lid onto the container of the aroma
device.
 Push the A/C trough back into place.

Re-install the front cover plate as described on page 31.
Cleaning
DANGER
RISK OF ELECTRIC SHOCK!
Turn off the mains disconnection
switch prior to performing any
cleaning job. Make sure that the
mains disconnection switch is
secured with lock and key against
accidential re-activation of power
supply. Else there is a risk of
electric shock.
CAUTION!
Never clean the sunbed with
aggressive or abrasive cleaning
solutions or solutions which
contain alcohol or etheric oils.
Do not use disinfectants like i. e.
Sagrotan.
These solutions can damage the
sunbed.

Only use specific cleaning solutions for acrylics
as provided by Advanced UV Light or authorized
distributor.
Clean the sunbed and top plexi after each session.
The surfaces and the low-pressure lamps must be cleaned as
necessary.

Spray disinfectant on top and sunbed plexi.
 Wipe plexis with a dry, soft cloth.
 Wipe low-pressure lamps and surfaces with a slightly
damp leather cloth.