Original Dr. Müller
®
ORIGINAL DR. MÜLLER HIGH PERFORMANCE TANNING EQUIPMENT
23
Control Options
Facials
The intensity of the facials can be set at
high or low intensity.
To select high intensity put the switch into the position of
the big lamp icon.
To select low intensity, put the switch into the position of
the small lamp icon.
Body Cooling Fan
The direction of the air-flow can be controlled manually by
adjusting the position of the air vents.
The intensity of the body cooling fan can
be set at a high or low level.
To select high intensity, put the siwtch into the position of
the big fan icon.
To select low intensity, put the switch into the position of
the small fan icon.
In order to switch off the body cooling fan completely, put
the switch into the center position.
Ionizer
The Ionizer device neutralizes the typical
tanning odor.
When the ionizer is activated, the control
light in the switch lights up.
Push the “Ionizer“-switch to de-activate.
Push the “Ionizer“-switch again to activate the Ionizer
device.
Air Conditioning Unit (optional)
The A/C unit creates a steady,
comfortable temperature during a
tanning session.
When the A/C unit is activated, the light
in the control switch lights up.
Push the “Klima“-switch to deactivate the A/C unit.
Push the A/C switch again to activate the A/C unit.
SunHaze aroma device (optional)
The aroma device refreshes the cooled
air.
When the aroma device is activated, the
light in the control switch lights up.
Push the “Aroma“ switch to deactivate the SunHaze
device.
Push the “Aroma“ switch again to activate the aroma
device.
Exposure Time
If the sunbed is not connected to a
control device, the sunbed can be set
manually up to maximum exposure time.
Maximum exposure time is pre-set by
manufacturer at 15 minutes
This feature is for domestic use only. All
sunbeds sold for commercial use must
be provided with a control device in
accordance with local/national standards
and regulations!
Push the ”Set Time“ switch until the display shows the
requested tanning time.
Start the tanning session. The unit stops automatically after
pre-set time has run out.
Starting/Stopping a tanning session
If the sunbed is not connected to a
control device, the sunbed must be
started manually.
You have the option to interrupt the
tanning session and continue the session
again.
Push “Start“ switch to start the tanning session.
Push the “Start“ switch again to stop the tanning session.
Summary of Contents for ELIXIR
