Advanced Power technologies TTC-1000, Instruction & Operation Manual, Page: 147 / 262

V6.230 20131017
136
Enter:87/1

This will add Load to the log. Type 0 to remove from the log.
12.5 Viewing the Data Log
The data log can be viewed on a PC through the RS-232 interface. Downloading
the data log does not erase the log. The data log is received as a comma
delimited ASCII data. It can be captured for use in other programs as shown in
the next section.
To view the log via a PC, open the terminal emulation program with the settings
used to access the main TTC-1000 menu.
First press the Enter key to display the Main Menu:
Advanced Power Technologies, LLC; (C) 2004-2008
Transformer Temperature Controller V6.23
Select:
1. VIEW SETPOINT AND LOGIC SETTINGS
2. PROGRAM SETPOINT AND LOGIC SETTINGS (2/XXXX)
3. VIEW CONFIGURATION SETTINGS
4. PROGRAM CONFIGURATION SETTINGS (4/XXXX)
5. STATUS
6. SEND SETTINGS TO COMPUTER
7. SEND SETTINGS TO UNIT (7/XXXX)
8. SEND CSV SETTINGS TO UNIT (8/XXXX)
9. DOWNLOAD DATA LOG
10. DOWNLOAD SOFTWARE PATCH (10/XXXX)
11. DIGITAL INPUTS AND TAP POSITION MONITORING
12. LOG OFF
Enter Code:
Enter menu option 9 and press Enter , the data log will be sent to the PC.
If no data is logged the data reported through the terminal emulation program will
show:
NO DATA
END OF REPORT. STOP TEXT CAPTURE & PRESS 'Enter'
Should the log contain data, the terminal emulation program will show:
DATE,TIME,TOP OIL,WINDING,LOAD
07/31/03,08:46:03,49 ,49 ,930
07/31/03,08:36:03,49 ,49 ,931
07/31/03,08:26:03,49 ,49 ,932
07/31/03,08:16:03,49 ,49 ,934
07/31/03,08:06:03,49 ,49 ,937
07/31/03,07:56:03,49 ,49 ,940
END OF REPORT. STOP TEXT CAPTURE & PRESS 'Enter'