Advanced Power technologies TTC-1000, Instruction & Operation Manual, Page: 14 / 262

V6.230 20131017
3
2 PRODUCT DESCRIPTION
The following section describes the front panel display, indicators, and switches,
connection points, mounting, physical size and panel cutout requirements
2.1 Controls & Indicators
Figure 2.1 shows the front panel displays, indicators, and switches. Control
layout of NEMA and panel units are identical other than panel size.
Figure 2.1: Front Panel
1. UP arrow button for navigating forward into menu categories and increasing settings.
2. DOWN arrow button for navigating backward into menu categories and decreasing settings.
3. LEFT arrow button used for moving to the next character to the left when changing settings.
4. RIGHT arrow button used for moving to the next character to the right when changing
settings.
5. YES button is used to enter a menu category, request to change a setting, and acknowledge
a setting change.
6. NO button is used to leave a menu category or abort a setting change.
7. ACTIVE indicator is a green LED that illuminates when power is applied.
8. ALARM indicator is a red LED that illuminates whenever an alarm condition is present.
Alarms can be caused by a failure detected in the electronics, or a broken temperature
probe. In NEMA 4 mounting models, this indicator will flash when using the light activated
Min/Max reset feature.
9. 16 character by 2 line Liquid Crystal Display.
10.
9 pin 15KV ESD protected RS-232 interface.
   
YES NO
ACTIVE
ALARM
RS-232
CLEAR WINDOW NO TEXTURE
Advanced Power Technologies
TTC-1000
6 5 4 3 2
1
7 8
10
9