ENGLISH
INSTRUCTION FOR USE
28
33019864(1)2009-05
Proterra™
HYDRAULIC OIL
WARNING!
Do not touch hot components.
Let the engine and hydraulic system cool down.
Drive the machine on a level
fl
oor, engage the parking brake
1.
and turn the ignition key (64) to “O”.
Open the engine compartment hood (1) by using the
2.
unlocking push-button (25).
Remove the left side hood (4) by using the latch, if
3.
necessary remove the water
fi
lter hose (30, optional).
Check the hydraulic oil level by means of the indicator on
4.
the tank (19).
The hydraulic oil level should be half way up the indicator.
If it is below this level, unscrew the plug (20) and add
Hydraulic oil AGIP Arnica 46.
Change the oil if major contamination from a mechanical
failure occurs (see the procedure in the Service Manual).
ENGINE OIL
WARNING!
Do not touch hot components.
Let the engine cool down.
Drive the machine on a level
fl
oor, engage the parking brake
1.
and turn the ignition key (64) to “O”.
Open the engine compartment hood (1) by using the
2.
unlocking push-button (25).
Check the engine oil level with the dipstick (A, Fig. 8-9-10)
3.
before each use of the machine.
If necessary, open the plug (B, Fig. 9-10) and top up.
(See the procedure in the Engine Manual).
Change the engine oil after the
fi
rst 50 hours of operation,
4.
and then after 150 hours.
The oil
fi
lter (C) should be replaced with every oil change
(see the procedure in the Service Manual).
According to the air temperature, use the type of oil
indicated below:
TEMPERATURE RANGE
TYPE OF OIL
Above 60°F (15°C)
SAE 10W-30
Below 60°F (15°C)
SAE 5W-30
A
MIN
MAX
P100329A
Figure 8
C
A
Proterra™ Diesel version
B
P100329D
Figure 9
A
C
B
Proterra™ LPG and Gasoline version
P100329P
Figure 10
