ADTRAN 1202011L1, User Manual

Page: 32 / 162

Chapter 3. Operation
3-2 DSU III AR User Manual 61202011L1-1
Status
Status is used to display all relevant information for the network
and DTE interfaces. It displays the current operating mode, loop
status, rate of service from the network, DTE data rate and format,
and TR, SR, LL, and RL DTE interface lead status. The display
returns to the status menu when the front panel is not accessed. See
Chapter 12, Viewing Status Information on page 12-1 for more
detailed information.
Test
Test is used to control local and remote testing. Select local or
remote testing, and select the type of test and test pattern when
required. For more information see Chapter 7, Configuring Test
Options on page 7-1.
Configuration (Config)
Configuration is used to select network and DTE operating
parameters. This menu branch is divided into several chapters for
easier reference. The division includes a brief overview chapter
followed by a separate chapter for each of the five submenus of the
CONFIG branch: Network Configuration on page 5-1, Configuring
DTE Options on page 6-1, Configuring Test Options on page 7-1,
Configuring Dial Options on page 8-1, and Manual Command on page
9-1.
Dial
Dial provides manual dialing functions. Key in a number to dial,
select one of the ten stored numbers, or redial the last dialed
number. This menu is available for use only when AT&T/MCI
SW56 or US SPRINT SW56 is the selected network type. See
Chapter 10, Dial Selection on page 10-1 for more information.
The DIAL option is only available when the unit is configured for a
Switched 56 network type. For more information, see Chapter 10, Dial Se-
lection on page 10-1.