ADTRAN 1202011L1, User Manual

Page: 64 / 162

Chapter 6. Configuring DTE Options
6-10 DSU III AR User Manual 61202011L1-1
CS Options
The C
LEAR TO
S
END
( CS O
PTIONS
) menu is used to select one of five
different control modes for the CS lead. Figure 6-7 shows the menu
path used to access the
CS O
PTIONS
menu. The default factory
setting is F
OLLOWS
RS with CS D
ELAY
S
HORT
.
If one of the options chosen involves request to send (RS), then the
delay from RS to CS must be selected. Table 6-5 on page 6-11 shows
the
AT C
OMMANDS
used to set the CS O
PTIONS
.
1= NETWORK OPT.
1= LOCAL 1= DTE RATE
2= DTE OPTIONS 2= CONNECTOR TYPE
3= DATA FORMAT
3=CONFIG 4= DTE CMD OPTION 1= FORCED ON 1= CS DELAY SHORT
5= TRANSMIT CLOCK 2= FOLLOW RS 2= CS DELAY LONG
2= REMOTE ENTER 3= TEST OPTIONS 6= CS OPTIONS 3= FOLLOWS CD
ADDRESS 4= DIAL OPTIONS 7= ANTI-STREAM 4= FOLLOWS RS+CD 1= CS DELAY SHORT
5= MANUAL COM. 8= CD OPTIONS 5= OFF THE LOCD 2= CS DELAY LONG
9= TR OPTIONS
A= SR OPTIONS
B= AUXLILARY PORT
Figure 6-7. Selecting CS Options