Single-channel all-digital AC servo drives QS7 Series
23
4.3.3
Parameter writing:
1.In the display status, press "Mode"
and select to enter
②
"parameter writing" parameter
writable state, When changed
parameters by user need to save for
long term, parameter writing operation
should be implemented.
2. Press "Enter" key for three seconds,
and the parameters will be written in
the internal EEPROM
3.then press "Enter" key to return,
after writing completion and showing
4.3.4
Parameter initialization:
1.In the display status, press "Mode"
and select to entry
③
"parameter initialization" state.
2. When the user needs to import the
factory system parameter values, press
"Enter" key for three seconds, and
parameters except for password will
be initialized to be the factory default
values for the system
。
however these
values do not write into the internal
EEPROM
3.After
completion
and
showing ,please press
"Enter" key to return.
4.If writing is necessary, please
implement writing operation.
And press Mode key to return.
