16
Hardware Installation:
1. To install the PYRO ProDV 1394 PCI card, follow the hardware
installation steps 1 – 12 on pages 11 - 13.
2. There are no drivers to install. Once you have installed the
hardware, boot your WinNT system and install DV Suite.
Software Installation
1. Insert PYRO ProDV CD #1
which contains the DV Suite install.
2. Run DV Suite. This will install the following applications:
- DVMovie - Motion video capture
- DVPhoto - Still image capture
Using DVMovie
1. Connect your camcorder to the PYRO ProDV card with the 6
ft. 6 pin to 4 pin DV cable.
2. Use the external power supply that came with your camcorder.
Do not run from battery power.
3. Turn the DV camcorder on to the VCR/VTR mode. DVMovie
will not run without the camcorder connected and turned on.
4. The DVMovie application looks like a “View” cam type cam-
corder interface. DVMovie has two (2) modes; Capture and
Broadcast. Capture is used to record video to your computer
hard drive. Broadcast is used to send video back to your
camcorder.
Software Installation for Windows NT4
