GB
After the journey
7
26
Adria Caravans
Extending the corner steady:
Place the crank (Fig. 7/1) against the corner steady (Fig. 7/2).
Turn the crank anticlockwise to extend the corner steady.
7.2.2
Electrical connection
If 230 V supply is available at your parking area, the electrical appliances can be connected to
this voltage supply (Chapter 10.1.1).
Observe the fuse protection of the voltage supply.
If there is no 230 V supply, individual appliances can be operated via the 12 V supply of the
towing vehicle. The 12 V supply works only when the towing vehicle is connected to the cara-
van and the ignition of the towing vehicle is switched on.
Some vehicles have their own living area battery (special equipment). On these vehicles, elec-
tric consumers can also be operated without connection of a towing vehicle.
7.2.3
Entrance step
Place the entrance step in front of the vehicle entrance door.
Fig. 7
Corner steady
1
Crank
2
Corner steady
3
Base
Important!
•
Place a firm substructure (Fig. 7/3) underneath the base (Fig. 7/2) of the corner steadies
when your vehicle is standing on soft ground such as grass or sand. This prevents sink-
ing into the ground and facilitates the retraction of the corner steadies before starting to
drive again.
Warning!
Risk of injury
Make sure to place the entrance step only on safe ground.
Do not step on the edge of the entrance step.
Fasten the entrance step on the ground.
10100009
1
2
3
