GB
Before the journey
5
Adria Caravans
19
5.2.2
Coupling BPW WS 3000 D
Coupling the vehicle:
Move the stabilizer lever (Fig. 4/1) to the uncoupling position (Fig. 4/2).
Position the open coupling onto the tow ball and, if necessary, press down by hand until
the coupling grip locks in with a click. The stabilizer handle moves approx. 10° down to
the coupling position (Fig. 4/3).
To activate the stabilizer device, press the stabilizer lever (Fig. 4/1) down to the bottom,
horizontal position (Fig. 4/4) to the stop.
Check that the tow ball is completely retracted and not visible when coupled.
For more information, see the separate instructions from the manufacturer.
5.3
Uncoupling the caravan
Uncoupling the vehicle:
Apply the caravan parking brake.
Secure the vehicle against rolling away with wheel chocks.
Disconnect the light/power supply plug from the towing vehicle socket and secure
safely.
Release the overrun brake cable from the tow bracket on the towing vehicle.
Crank the jockey wheel down. The wheel must be firmly on the ground.
If necessary, also open the stabilizer lever of the stabilizer device.
Fig. 4
Coupling BPW WS 3000 D
1
Stabilizer lever
2
Uncoupling position
3
Coupling position
4
Stabilizer device active
Warning!
Risk of injury during uncoupling
Always apply the parking brake before uncoupling.
Secure the vehicle against rolling away before uncoupling the vehicle.
10100112
1
2
3
4