GB
Heater & hot water
13
Adria Caravans
107
Leave the taps open until the water flows out without bubbles. The boiler is now filled
with water.
Close all taps.
Emptying the boiler:
Place a collector under the drainage opening of the drain cock.
Switch off the rocker switch for electric operation (Fig. 86/1) and the rotary knob for gas
operation (Fig. 85/3). The control lamps in the switches are off.
Switch off the 12 V supply.
Open all taps.
Open the safety/drain valve (Fig. 84/2). To do this, set the rocker arm vertical.
Check that the boiler is completely empty.
Dispose of the water collected at an approved location.
For more information, see the separate instructions from the manufacturer.
13.7.2
Boiler in gas mode
Switching the boiler on in gas mode:
Remove the cowl flap.
Open the main shut-off valve on the gas cylinder and "Boiler" quick-action stop valve.
Switch on the 12 V supply.
Set the rotary switch (Fig. 85/3) to "On" (Fig. 85/5). The green control lamp "Operation"
goes on in the rotary knob (Fig. 85/1).
Set the desired water temperature on the rotary knob (Fig. 85/1).
The red control lamp (Fig. 85/2) goes on when a malfunction occurs. For more information, see
the separate instructions from the manufacturer.
Switching the boiler off in gas mode:
Set the rotary switch (Fig. 85/3) to "Off" (Fig. 85/4).
Close the "Boiler" quick-action stop valve and the main shut-off valve on the gas cylin-
der.
Put the exhaust cowl flap back on.
The red control lamp (Fig. 85/2) goes on when a malfunction occurs.
For more information, see the separate instructions from the manufacturer.
Fig. 85
Boiler operating unit in gas mode
1
Temperature rotary knob
2
Control lamp for malfunctions
(red)
3
"On/Off" rotary switch
4
Off
5
On
10100003
Boiler
40
30
50
60
70
5
4
3
2
1