GB
Troubleshooting
21
154
Adria Caravans
21.2
Replacing lighting elements
Before starting to drive, check the function of all interior and exterior lighting equipment on the
vehicle and replace defective lighting elements.
21.2.1
Changing bulbs - front
The contour lights at the front are LED lights. The LED lights have a very long service life and
seldom need to be replaced. Lamps should only be replaced in a workshop. Contact your
ADRIA dealer in the case of defects.
21.2.2
Changing bulbs - rear
The rear lights are also LED lights on some models. The LED lights have a very long service
life and seldom need to be replaced. Lamps should only be replaced in a workshop. Contact
your ADRIA dealer in the case of defects.
The rear light glass of rear lights are closed with one or two recessed-head screws depending
on the vehicle type.
Exchanging light bulbs:
Unscrew the recessed-head screws and remove the rear light glass.
The bulb sits in a bayonet socket. Press the defective bulb slightly into the socket and
turn it anticlockwise.
When inserting two-filament bulbs (recognisable by the two soldering points on the
base), pay attention to the different bayonet guides (protection against incorrect inser-
tion).
Check that the new light bulb works.
Refit the rear light glass and screw in the recessed-head screws.
21.2.3
Exchanging light bulbs - on the side
The side marker lights are LED lights on some models. The LED lights have a very long service
life and seldom need to be replaced. Lamps should only be replaced in a workshop. Contact
your ADRIA dealer in the case of defects.
Exchanging the contour light bulbs (red/white):
Remove the contour light glass.
The bulb sits in a bayonet socket. Pull the defective light bulb out of the socket.
Check that the new light bulb works.
Refit the contour light glass.
Caution!
Damage to bulbs
Never touch the new bulbs with your bare fingers. Always use a clean and lint-free
cloth.
