ADLINK Technology STC2-10WP-AL, User Manual, Page: 55 / 121

45
STC2-AL/KL Series
4.4.19 Advanced > Console Redirection > COM 3 > Con -
sole Redirection Settings
Feature Options Description
Terminal Type VT100
VT100Plus
VT-UTF8
ANSI
Emulation:
ANSI: Extended ASCII character set.
VT100: ASCII character set.
VT100Plus: Extends VT100 to support
color, function keys, etc.
VT-UTF8: Uses UTF8 encoding to map
Unicode chars onto 1 or more bytes.
Bits per second 9600
19200
38400
57600
115200
Selects serial port transmission speed.
The speed must be matched on both
connected systems. Long or noisy lines
may require lower speeds.
Data Bits 7
8
Data Bits.
Parity None
Even
Odd
Mark
Space
A parity bit can be sent with the data
bits to detect some transmission errors.
Even: parity bit is 0 if the num of 1's in
the data bits is even.
Odd: parity bit is 0 if num of 1's in the
data bits is odd.
Mark: parity bit is always 1.
Space: Parity bit is always 0.
Mark and Space Parity do not allow for
error detection. They can be used as an
additional data bit.
Stop Bits 1
2
Stop bits indicate the end of a serial
data packet. (A start bit indicates the
beginning). The standard setting is 1
stop bit. Communication with slow
devices may require more than 1 stop
bit.
Flow Control None
Hardware
RTS/CTS
Flow control can prevent data loss from
buffer overflow. When sending data, if
the receiving buffers are full, a 'stop'
signal can be sent to stop the data flow.
Once the buffers are empty, a 'start'
signal can be sent to re-start the flow.
Hardware flow control uses two wires to
send start/stop