
106
Important Safety Instructions
A Lithium-type battery may be provided for uninterrupted
backup or emergency power.
The device must be serviced by authorized technicians when:
The power cord or plug is damaged
Liquid has entered the device interior
The device has been exposed to high humidity and/or
moisture
The device is not functioning or does not function accord
-
ing to the User’s Manual
The device has been dropped and/or damaged and/or
shows obvious signs of breakage
Disconnect the power supply cord before loosening the
thumbscrews and always fasten the thumbscrews with a
screwdriver before starting the system up.
It is recommended that the device be installed only in a
server room or computer room where access is:
Restricted to qualified service personnel or users familiar
with restrictions applied to the location, reasons therefor,
and any precautions required
Only afforded by the use of a tool or lock and key, or other
means of security, and controlled by the authority respon
-
sible for the location.
CAUTION:
Risk of explosion if battery is replaced with one of an incorrect
type; please dispose of used batteries appropriately.
BURN HAZARD
Touching this surface could result in bodily injury.
To reduce risk, allow the surface to cool before
touching.
Summary of Contents for STC2-10WP-AL
