ADLINK Technology STC2-10WP-AL, User Manual, Page: 53 / 121

43
STC2-AL/KL Series
4.4.18 Advanced > Console Redirection > COM 2 > Con -
sole Redirection Settings
Flow Control None
Hardware
RTS/CTS
Flow control can prevent data loss from
buffer overflow. When sending data, if
the receiving buffers are full, a 'stop'
signal can be sent to stop the data flow.
Once the buffers are empty, a 'start'
signal can be sent to re-start the flow.
Hardware flow control uses two wires to
send start/stop
VT-UTF8 Combo Key
Support
Disabled
Enabled
Enable VT-UTF8 Combination Key
Support for ANSI/VT100 terminals
Recorder Mode Disabled
Enabled
With this mode enabled only text will be
sent. This is to capture terminal data.
Resolution 100x31 Disabled
Enabled
Enables/Disables extended terminal
resolution
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400
Select FunctionKey and KeyPad on
Putty.
Feature Options Description
Terminal Type VT100
VT100Plus
VT-UTF8
ANSI
Emulation:
ANSI: Extended ASCII character set.
VT100: ASCII character set.
VT100Plus: Extends VT100 to support
color, function keys, etc.
VT-UTF8: Uses UTF8 encoding to map
Unicode chars onto 1 or more bytes.
Bits per second 9600
19200
38400
57600
115200
Selects serial port transmission speed.
The speed must be matched on both
connected systems. Long or noisy lines
may require lower speeds.
Data Bits 7
8
Data Bits.
Feature Options Description