manualshive.com logo in svg

ADLINK Technology PXIe-9834, User Manual, Page: 32 / 65

Share
Download
ADLINK Technology PXIe-9834 User Manual Download Page 32

20

 Getting 

Started

Leading

EDGE COMPUTING

Inspect the carton and packaging for damage. Shipping and han-
dling could cause damage to the equipment inside. Make sure that
the equipment and its associated components have no damage
before installation.

2.2 Package Contents

X

PXIe-9834 digitizer

X

PXIe-9834 Quick Start Guide

If any of these items are missing or damaged, contact the dealer. 

CAUTION:

The equipment must be protected from static discharge and 
physical shock. Never remove any of the socketed parts except 
at a static-free workstation. Use the anti-static bag shipped with 
the product to handle the equipment and wear a grounded 
wrist strap when servicing.

WARNING:

Do not install or apply power to equipment that is damaged or 
missing components. Retain the shipping carton and packing 
materials for inspection. Please contact your ADLINK dealer/
vendor immediately for assistance and obtain authorization 
before returning any product.

Summary of Contents for PXIe-9834


































































Reviews:

No comments