ADLINK Technology PXIe-9834 User Manual Download Page 22 | Manualshive

Page: 22 / 65

ADLINK Technology PXIe-9834 User Manual Download Page 22

10

Introduction

Leading

EDGE COMPUTING

1.4 Software Support

ADLINK provides versatile software drivers and packages to suit
various user approaches to building a system. Aside from pro-
gramming libraries, such as DLLs, for most Windows-based sys-
tems, ADLINK also provides drivers for other application
environments such as LabVIEW. All software options are included
in the ADLINK All-in-One CD. Commercial software drivers are
protected with licensing codes. Without the code, you may install
and run the demo version for trial/demonstration purposes for only
up to two hours. Contact your ADLINK dealer to purchase the soft-
ware license. The ADLINK Measurement, Automation & Platform
Service (MAPS) is a software service package designed for data
acquisition, automation and PXI platform. By leveraging the
sophisticated architecture in low-level kernel management and
user friendly API, users can easily manage devices under a Win-
dows environment and focus on developing applications.

Figure 1-3: ADLINK Measurement, Automation &

Platform Service (MAPS) Architecture

«
...
20
21
22
23
24
...
»

Summary of Contents for PXIe-9834


































































Reviews:

No comments