ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 22
Par Z Move
Operating Instructions
LED On Time-R
- With this function you are able to check current LED ON running time
of the unit. This running time may not be the same as the total LED ON time displayed under
“LED ON TIME”. This total LED ON time CAN be reset.
NOTE: The displayed time represents the current LED ON time since the last reset.
1. Access the main menu and press the UP or DOWN buttons so that “Information” is highlighted then
press ENTER.
2. Press the UP or DOWN buttons until “
Fixture Life Time
” is highlighted and press ENTER.
3. Press the UP or DOWN buttons until “
LED On Time-R
” is highlighted and press ENTER.
4. The power ON running time of the fixture will now be displayed. Press the MENU button to exit.
LED Time Reset
- With this function you can reset the current LED ON time that is
displayed under “LED ON TIME-R”.
1. Access the main menu and press the UP or DOWN buttons so that “Information” is highlighted then
press ENTER.
2. Press the UP or DOWN buttons until “
Fixture Life Time
” is highlighted and press ENTER.
3. Press the UP or DOWN buttons until “
LED Time Reset
” is highlighted and press ENTER.
4. Use the UP or DOWN buttons to set the pass code to “50” and press ENTER. The LED ON TIME-R
will now be reset to “0”
Current
- With this function you can check the current temperature of the LED.
1. Access the main menu and press the UP or DOWN buttons so that “Information” is highlighted then
press ENTER.
2. Press the UP or DOWN buttons until “
Fixture Temps
” is highlighted and press ENTER.
3. Press the UP or DOWN buttons until “
Current
” is highlighted and press ENTER.
4. The current temperature of the LED will now be displayed. Press the UP or DOWN buttons to
switch between farenheit and celsius. Press the MENU button to exit.
Max Resettable
- With this function you are able to check the current highest temperature
the LED has reached. This LED temperature may not be the same as the temperature displayed under
“CURRENT” or “MAX NOT RESETTABLE”. This LED temperature CAN be reset.
NOTE: The displayed temperature represents the highest temperature the LED has reached
since the last reset.
1. Access the main menu and press the UP or DOWN buttons so that “Information” is highlighted then
press ENTER.
2. Press the UP or DOWN buttons until “
Fixture Temps
” is highlighted and press ENTER.
3. Press the UP or DOWN buttons until “
Max Resettable
” is highlighted and press ENTER.
4. The hightest LED temperature will now be displayed. Press the UP or DOWN buttons to switch
between farenheit and celsius. Press the MENU button to exit.