manualshive.com logo in svg

ADJ PAR Z MOVE, User Instructions

Share
Download
ADJ PAR Z MOVE User Instructions Download Page 19

ADJ Products, LLC  -  www.adj.com  - Par Z Move User Manual Page 18

  

Par Z Move

                                                                             

Operating Instructions

Hibernation

 - With this function the LEDs and step motors will power off if there is no 

DMX signal within 15 mins (factory defualt). Once it receives a DMX signal, the fixture will reset 

itself.
1.  Access the main menu and press the UP or DOWN buttons so that “Personality” is higlighted      

  and press ENTER.
2. Press the UP or DOWN buttons until “Hibernation” is highlighted then press ENTER.
3.  The current stand by setting will be displayed, use the LEFT or RIGHT buttons to adjust the hibernation    

  period between “01M-99M” or “Off”.
4. Press the ENTER button to confirm your setting or press the MENU button to exit.

Fan Settings

 

- With this function, you can select your desired fan speed.

1.  Access the main menu and press the UP or DOWN buttons so that “Personality” is highlighted  

 

  then press ENTER.
2. Press the UP or DOWN buttons until “Fan Speed” is highlighted and press ENTER. .
3. Use the UP or DOWN buttons to scroll through the settings.
4. Press the ENTER button to confirm your setting or press the MENU button to exit.

Dim Modes

 - This will let select your desired dimmer curve. In this mode the dimmer 

speed can also be adjusted. The dimmer speed adjustment will affect all dimmer curve modes.

1.  Access the main menu and press the UP or DOWN buttons so that “Personality” is highlighted  

 

  then press ENTER. 
2.  1 of 6 dimmer curves or dim speed will be displayed. “

Standard

”, “

Stage

”, “

TV

”, “

Architectural

”,    

 “

Theatre

”, or “Stage 2”. See the dimmer curve chart on page 25 for more info.

3.  Press the UP or DOWN buttons to find your desired dimmer curve

.

4. Press the ENTER button to confirm your setting or press the MENU button to exit. 

LED Refresh Rate

 - With this function you can adjust the dimming frequency.

1.  Access the main menu and press the UP or DOWN buttons so that “Personality” is highlighted  

 

  then press ENTER.
2.  Use the UP or DOWN buttons to adjust the dimming frequency between 900hz, 1000hz, 1100hz,   

  1200hz, 1300hz, 1400hz, 1500hz, 6000hz, or 25000hz.
3. Press the ENTER button to confirm your setting or press the MENU button to exit. 

Summary of Contents for PAR Z MOVE































Reviews:

No comments

Brands by name

Popular brands

Load more brands