ADJ PAR Z MOVE, User Instructions

Page: 25 / 30

ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 24
Par Z Move Operating Instructions
Error Logs
- With this function you can check any errors that might be affecting the unit
and reset the error logTurn .
1. Access the main menu and press the UP or DOWN buttons so that “Information” is highlighted then
press ENTER.
2. Press the UP or DOWN buttons until “
Error Logs ” is highlighted and press ENTER.
3. Use the UP or DOWN buttons to switch between “Fixture Errors” and “Reset Error Log”. Press
the ENTER button to make your selection.
- Fixture Errors - This will give you a rundown of any errors that the fixture might have encountered.
- Reset Error Log - This will allow you to reset the Error Log. The pass code is “50”.
4. Press the MENU button to exit the menu.
Max Temp LED ON
- With this function you can check the current temperature of the
fixture. Note: This reflects the temperature of the fixture when the LED is On.
1. Access the main menu and press the UP or DOWN buttons so that “Information” is highlighted then
press ENTER.
2. Press the UP or DOWN buttons until “
Max Temp LED ON ” is highlighted and press ENTER.
3. The fixtures current LED On temperature will now be displayed. Press the UP or DOWN buttons to
switch between farenheit and celsius. Press the MENU button to exit.
Max Temp LED OFF
- With this function you can check the current temperature of the
fixture. Note: This reflects the temperature of the fixture when the LED is Off.
1. Access the main menu and press the UP or DOWN buttons so that “Information” is highlighted then
press ENTER.
2. Press the UP or DOWN buttons until “
Max Temp LED OFF ” is highlighted and press ENTER.
3. The fixtures current LED Off temperature will now be displayed. Press the UP or DOWN buttons
to switch between farenheit and celsius. Press the MENU button to exit.
Software Version
- Use this function to display the Software version of the unit.
1. Access the main menu and press the UP or DOWN buttons so that “Information” is highlighted then
press ENTER.
2. Press the UP or DOWN buttons until “
Software Version ” is highlighted and press ENTER.
3. The current software version will now be displayed.