ADJ HYDRO BEAM X1, User Manual, Page: 29 / 42

29
W I F LY C O N T R O L
BEFORE SETTING THE WIRELESS CHANNEL ON ANY WIFLY FIXTURE, MAKE
SURE THE SOURCE WIFLY WIRELESS DMX TRANSCEIVER DEVICE IS OFF.
With this feature you are able to control the unit with DMX without relying on XLR cables. Your DMX
controller must be connected to an ADJ WiFly Transceiver to use this function. Maximum range is
2500 feet/760 meters (open line of sight).
1. Ensure the source WiFly wireless DMX Transceiver device is powered OFF.
2. Power ON the fixture. Use the control panel to scroll to the PERSONALITY menu and press
ENTER. Use the UP and DOWN buttons to highlight the WIFLY SETTINGS submenu and press
ENTER.
3. Using the UP and DOWN buttons, highlight ENABLE/DISABLE WIFLY. Press the ENTER button
to toggle between ENABLE & DISABLE. Press ENTER so that “ENABLE” is displayed.
4. Highlight SET WIFLY CHANNEL and press ENTER. Use the UP and DOWN buttons to find your
desired WiFly address and press ENTER to confirm. Selectable WiFly channels range from 0 - 14.
• NOTE: Erratic fixture movement may occur if other WiFly wireless DMX products are operat-
ing in the immediate area and are using the same WiFly wireless channel. In these cases, your
fixture may respond to the DMX wireless signal from another WiFly wireless DMX Transceiver.
Please make note of any nearly WiFly devices and the channels they are operating on, and set
up your device accordingly.
5. Press the MENU button to exit out of the WIFLY SETTINGS submenu. Press the UP button so
that SELECT SIGNAL is highlighted, then press ENTER. Press the DOWN button to highlight WI-
FLY and press ENTER. Select YES and press ENTER to confirm.
6. Set your desired DMX address in the DMX ADDRESS submenu of the DMX SETTINGS main
system menu. Set your desired DMX channel mode in the DMX CH MODE submenu of the DMX
SETTINGS main system menu.
7. Repeat this process for all WiFly compatible fixtures in the WiFly wireless network, making sure all
fixtures are assigned the same WiFly wireless channel.
8. After all fixtures in the WiFly wireless network have been set to the same WiFly wireless channel
and powered ON, power ON the source WiFly DMX Transceiver device.
9. Test all fixtures connected to the WiFly wireless network to confirm proper functionality.